新建题库11100915_在线真题试卷与模拟练习_新建题库11100915

更新时间：试题数量：购买人数：提供作者：

有效期：个月

章节介绍：共有个章节

我的练习

我的错题
(0道)

我的收藏
(0道)

我的斩题
(0道)

我的笔记
(0道)

专项练习

顺序练习 0 / 0

随机练习 自定义设置练习量

题型乱序 按导入顺序练习

模拟考试 仿真模拟

题型练习 按题型分类练习

易错题 精选高频易错题

学习资料 考试学习相关信息

搜索

题库预览

When might a switch add a VLAN tag to a frame?

A Junior Network Engineer is troubleshooting a user's connectivity issue. The user is on the 10.10.10.0/24 network and is trying to reach a server on the 10.10.20.0/24 network. The user's traffic must pass through a router. What information must the user's computer have in its IP configuration to send traffic to a different subnet?

A Network Technician is configuring an access Layer switch (ALS) to connect to a core switch. The Connection uses two physical links that need To be bundled into a Link Aggregation Group (LAG) For Increased bandwidth and redundancy. The LAG will function as a VLAN trunk to carry both Staff (VLAN 100) And Guest (VLAN 200) traffic. The technician must also enable RSTP for Loop prevention.

Initial State:

∗ The switch is in its factory default State, connected via the console.

∗ The physical links Are on ports 1/1/47 and 1/1/48.

Required Configuration:

∗ Create VLAN 100 and VLAN 200.

∗ Enable Rapid Spanning Tree Protocol (RSTP).

∗ Create LAG interface `lag 1`.

∗ Configure `lag 1` to use LACP (active mode).

∗ Add ports 1/1/47 And 1/1/48 to `lag 1`.

∗ Configure `lag 1` as a VLAN trunk, allowing VLANs 100 and 200.

∗ Enable the physical ports and the LAG interface.

Which Configuration set correctly implements all the specified Layer 2 requirements?

A Solutions Architect is Designing a new, highly resilient access layer using a stack of HPE Aruba Networking CX 6300 switches. To simplify management and provide seamless redundancy, the architect has decided to use the Virtual Switching Framework (VSF) to stack two switches together.

∗ Switch 1 (Future Commander): The architect is connected to this switch via the console.

∗ Switch 2 (Future Standby): Is in a factory default state.

∗ VSF Links: The switches will be connected in a ring topology using the dedicated VSF ports 1 and 2 on the rear of the switches.

∗ VSF Domain ID: 10

Which of the following command sets, when executed on Switch 1, correctly initiates the VSF formation process?

A Network Technician is connecting two switches in different buildings that are 1.5 kilometers apart. The required connection speed is 1Gbps. Which combination of Layer 1 media and transceiver type is most appropriate for this connection?

A Junior Network Engineer is tasked with the initial Setup of a new HPE Aruba Networking CX 6100 switch. The switch needs to Be configured with a hostname,a secure local administrator password, and a management IP address so it can be accessed on the network.

Initial State:

∗ The switch is in its factory default state.

∗ The engineer is connected to the switch via the console port.

Required Configuration:

∗ Hostname: `ALS-01`

∗ Admin Password: `Aruba!CX!2023`

∗ Management Interface: `vlan 1`

∗ Management IP Address:

`192.168.5.10/24`

Which of the following configuration sets correctly implements all the specified initial settings?

A Network Operator is troubleshooting a connectivity issue where a host (10.10.10.50) cannot communicate with its default gateway (10.10.10.1). When the operator checks the ARP table on the gateway, the entry for 10.10.10.50 is "Incomplete". What is the function of the Address Resolution Protocol (ARP) in this scenario?

A Solutions Architect is choosing between different switch Families in the HPE Aruba Networking Portfolio. The primary requirement For an upcoming deployment is support for Virtual Switching Framework (VSF) to stack up to 10 switches into a single logical device for simplified management at the campus Aggregation layer. Which switch series

Has this specific software and hardware Capability?

A Solutions Architect is presenting the HPE Aruba Networking switching portfolio to a customer. The customer needs to Understand the primary software differentiator of the AOS-CX operating system. Which Feature is a core component and key differentiator of the AOS-CX software architecture?

A Network Operator is configuring a new workstation with the IP address 10.5.5.100, subnet mask 255.255.255.0, and default gateway 10.5.5.1. The user needs to communicate with a server at 172.16.10.20 How does the workstation determine where to send the packet?

What is the primary purpose of implementing a LAG in a network environment?

A Security Analyst is hardening a network And wants to implement filtering rules that block specific Types of traffic based on the logical Addresses of the source and destination. For example, they want to Block all traffic from the 10.0.0.0/8 network. At which layer Of the OSI model do routers and multi-layer Switches make forwarding decisions based on this type of logical Addressing? (Choose 2.)

A network technician wants to capture traffic from a user's PC connected to port 1/1/5 and send a Copy of that traffic to their own laptop, connected to port 1/1/24, for Analysis with a protocol analyzer like Wireshark. The user on port 1/1/5 is experiencing issues accessing a specific application. Which general troubleshooting feature should the technician configure on the switch to accomplish this?

A Solutions Architect has just completed the Layer 3 Configuration for a new campus core switch. The configuration includes several Switched Virtual Interfaces (SVIs) for inter-VLAN routing and a Static default route for internet access. Before handing the solution over to the operations team, the architect needs to perform a final validation of the IP routing setup. The Architect needs to verify the following in a single, consolidated view: ∗ That the directly connected VLAN interfaces (SVIs) are active in the routing table. ∗ That the static default route is correctly installed and active. ∗ The IP addresses of any next-hop gateways. Which of the following validation commands provides this complete overview of the switch's Layer 3 Forwarding information?

A Solutions Architect is diagnosing a network issue where a specific server is unreachable. The architect uses `traceroute` and the output stops at a particular router, which is the last responsive hop. The architect now wants to verify the complete routing table on that specific Router to understand why it is not forwarding the traffic correctly. ·1 10.1.1.1 (10.1.1.1) 1.123 ms 1.122 ms 1.121 ms ·2 10.10.1.2 (10.10.1.2) 5.432 ms 5.433 ms 5.432 ms ·3 ∗ ∗ ∗ ·4 ∗ ∗ ∗ The last responsive hop is 10.10.1.2. Which command would the architect use on the router At 10.10.1.2 to validate its entire Layer 3 Forwarding table?

Which port role in RSTP Is responsible for forwarding traffic Toward the root bridge?

A Network Operator is investigating a report of intermittent connectivity between a user in the Sales VLAN (VLAN 10, subnet 192.168.10.0/24) and a server in the Finance VLAN (VLAN 20, subnet 192.168.20.0/24). The operator suspects a routing issue on the core switch that handles inter-VLAN routing. The operator logs into the core switch and runs `show ip route`. Show ip route Codes: C - Connected, S - Static, R - RIP, O - OSPF, B - BGP > - Selected route, ∗ - FIB route ·S > 0.0.0.0/0 [1/0] via 172.16.1.1, vlan1 ·C > 172.16.1.0/30 is directly connected, vlan1 ·C > 192.168.10.0/24 is directly connected, vlan10 ·C > 192.168.20.0/24 is directly connected, vlan20 ·O > 192.168.30.0/24 [110/2] via 172.16.1.1, vlan1 The routing table appears correct. To investigate the ∗intermittent∗ nature of the problem, the operator needs to see the real-time, hop-by-hop path the traffic is taking between the user and the server. Which command should the operator use from the core switch's CLI to trace this path?

What is the administrative distance of a directly connected route?

A Network Operator needs to ensure that VoIP traffic is given the highest priority as it traverses the network. The operator decides to use Layer 3 QoS marking.Which IP header field is used by routers to carry this QoS marking information, often referred to as the DSCP value?

A Network Operator is in a data center and needs to quickly provision a new HPE Aruba Networking CX switch. The operator has Their smartphone and wants to perform the initial configuration, connect the switch to Aruba Central, and check its status without using a laptop. Which tool is specifically designed for this on-site, mobile-first workflow?

1 2 3 4 5 6 11