单选题 The moment is the product of the weight of an item multiplied by its arm.

A、 时刻是一个项目的重量和它的手臂的乘积。
B、 力矩是一个项目的重量除以它的力臂的产物。
C、 力矩是一个项目的重量乘以它的力臂的乘积。
下载APP答题
由4l***y9提供 分享 举报 纠错

相关试题

单选题 Make sure that there is no blockage of the pitot pipe.

A、确保静压管没有堵塞。
B、确保皮托管没有堵塞。
C、确保排气管没有渗漏。

单选题 If you cannot remove a bolt because of corrosion, apply penetrating oil.

A、如果由于腐蚀你不能拆卸螺栓,则涂渗透油。
B、如果你不能去除螺栓的腐蚀,则申请穿透油。
C、如果你由于防腐不能拆卸螺钉,则涂渗透油。

单选题 Tighten the nuts but do not torque them at this time.

A、拧松螺钉,但同时不要给它们打力矩。
B、拧紧螺栓,但此时不要扭矩它们。
C、拧紧螺母,但此时不要给它们打力矩。

单选题 Select the hydraulic system that you will pressurize.

A、Choose the hydraulic system you will apply pressure.
B、Pressurize the selected hydraulic system.
C、Choose the hydraulic system you will depressurize.

单选题 There is a risk of fire.

A、There will be no fire.
B、Fire will occur sometimes.
C、There is danger of fire.

单选题 Arrows shall be used to indicate flow direction when needed to understand the schematic diagram.

A、当必须理解原理图时,最好使用箭头来画出流动方向。
B、当需要理解原理图时,应该使用箭头来指示流动方向。
C、当需要理解计划表时,应该使用线条来指示流动方向。

单选题 In addition, it shall provide definitions or explanations of symbols, abbreviations, and terminology used in the Handbook.

A、另外,它应提供手册中使用的符号、缩略语和术语的定义或解释。
B、另外,它应提供象征的定义或解释、缩略语和手册中使用的术语。
C、另外,它应提供符号和缩略语的定义或解释、以及手册中使用的技术。

单选题 The flap angles are specified in Table 1.

A、The flap angles can not be found in Table 1.
B、The flap angles are stated in Table 1.
C、In Table 1, there are no flap angles.