An architect is preparing a design f

单选题 An architect is preparing a design for a customer. Based on requirements, the architect recommends
An HCI- based infrastructure with all-flash architecture. During the assessment, it is confirmed that the
Network throughput generated by virtual machines does not exceed 150 Mb/s.
What is the minimum number and type of network adapters in each server that the architect can
Recommend to ensure requirements are met and there is no single point of failure?

A、 Four 1 GbE network adapters per server

B、 Four 10 GbE network adapters per server

C、 Two 10 GbE network adapters per server

D、 Two 1 GbE network adapters per server

查看答案

下载APP答题

由4l***4m提供分享举报纠错

相关试题

单选题 An architect will be updating an existing vSphere data center design.

The following information has been provided:

The new design must carry over existing VLANs for workloads.

The networking for storage must not share the data path with workload traffic.

The new design must be able to add additional VLANs.

The new design must reduce management overhead.

The new replacement servers have two 100 GB network cards.

Which design will meet the requirements for existing workload networks and allow scaling of additional networks?

A、One vSphere standard switch (VSS) configuration Workload and storage traffic on separate uplinks

B、One vSphere distributed switch (VDS) configuration The VDS uses aggregated uplinks Workload and storage traffic on the aggregated uplinks

C、One vSphere distributed switch (VDS) configuration Workload and storage traffic on separate uplinks

D、Two vSphere distributed switches (VDS) Each VDS uses one uplink as active and the other uplink as passive

查看答案

单选题 Refer to the exhibit. During a requirements gathering workshop, the architect shares the following
Diagram:
What should the architect recommend for guaranteed throughput for each service?

A、- Use explicit failover order with pNIC0 as Active for ESXi Management and VM Network - Use explicit failover order with pNIC1 as Active for backup network - Use explicit failover order with pNIC2 as Active for vMotion - Use explicit failover order with pNIC3 as Active for replication

B、- Use the Route Based on IP Hash for ESXi management and VM network - Use the Route Based on IP Hash for backup network - Use the Route Based on the Originating Virtual Port for vMotion - Use failover with pNIC3 as Active for replication.

C、- Create a link aggregation group (LAG) for vDS_01 - Use the Route Based on Physical NIC Load for vMotion - Use the Route Based on Physical NIC Load for replication

D、- Use the Route Based on IP Hash for ESXi management and VM network - Use failover with pNIC1 as Active for backup network - Create a link aggregation group (LAG) for vDS_02

查看答案

单选题 An architect is designing a new vSphere solution. The customer has provided the following information to describe how the solution will be used:

The solution will host development workloads

Administrators will utilize snapshots frequently, with snapshots sometimes retained for extended periods of time

Some of the workloads are sensitive to latency on t he I/O of the storage

Storage for the workloads will be provided by a physical array

The physical array does not include a storage provider 

All  workloads    must  be  hosted  on  the  solution,  there   are  no  other  vSphere environments available for use

Which  design   decision  should   the  architect   make  to    meet  the   needs   of  the customer?

A、Use a storage array which supports vSphere Storage APIs - Storage Awareness (VASA) to configure Virtual Volumes (vVols) datastores for the workloads

B、On workloads which will use snapshots, set the latency-sensitivity-high advanced setting

C、On workloads which are sensitive to latency, set the latency-sensitivity-high advanced setting

D、Use a storage array which supports VMware vSphere APIs: Array Integration (VAAI) to configure VMFS datastores for the workloads

查看答案

单选题 How do you determine the network protocol needs for a vSphere network design?

A、By calculating the storage requirements for vSphere hosts.

B、By identifying the number of virtual machines that will run on the hosts.

C、By specifying the expected levels of system performance and responsiveness.

D、By considering the type of data traffic and communication requirements in the environment.

查看答案

单选题 When performing a vSphere upgrade, what is the best practice to ensure compatibility with existing
Hardware, software, and third-party plugins?

A、Upgrade the vCenter Server first, followed by ESXi hosts

B、Upgrade ESXi hosts first, followed by the vCenter Server

C、Perform a clean installation of vSphere components on new hardware

D、Disconnect all third-party plugins before starting the upgrade process

查看答案

单选题 What is the purpose of gathering and analyzing network requirements?

A、To determine the amount of data storage needed for the system.

B、To identify the specific tasks and operations the system should perform.

C、To optimize the system's processing power and resources.

D、To ensure efficient data transfer and connectivity between system components.

查看答案

单选题 Which VMware product offers a software-defined storage solution, providing distributed storage
Architecture that spans multiple vSphere clusters?

A、vSAN

B、NSX-T

C、vSphere Replication

D、VMware Workstation

查看答案

单选题 What do compliance requirements for a vSphere design entail?

A、Identifying the virtual machines and cores needed for the vSphere environment.

B、Ensuring that the vSphere system complies with relevant regulations and standards.

C、Specifying the hardware specifications required for the vSphere environment.

D、Optimizing the system's data storage and retrieval processes.

查看答案